Chat
Press the chat bubble in the bottom-right corner to connect with us instantly.
(When agents available)
FLIR X8580-HS InSb™
High Definition MWIR Science-Grade Camera
Product Variations
The FLIR X8580-HS InSb midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
Standout Performance, Game-changing Capabilities
Experience unmatched image clarity and speed with 10 GigE, CXP 2.1 high-speed interfaces or Camera Link Full.
Capture more than two hours of detailed thermal events directly to a 4 TB SSD with zero dropped frames.
Proprietary triggering, synchronization, and accurate IRIG time stamping system ensures precise on-time recording.
Specifications
| Highlighted | |
|---|---|
| Resolution | 1280 × 1024 |
| Detector Pitch | 12 µm |
| Spectral Range | FLIR X8580-HS InSb, FLIR X8582-HS InSb : 1.5 – 5.0 µm FLIR X8581-HS InSb, FLIR X8583-HS InSb: 3.0 – 5.0 µm |
| Detector Type | FLIR Indium Antimonide (InSb) |
| Camera f_number | FLIR X8580-HS InSb, FLIR X8582-HS InSb : f/2.5 FLIR X8581-HS InSb, FLIR X8583-HS InSb: f/4.1 |
| Dynamic Range | 14-bit |
| Frame Rate [Full Window] | Programmable; approx. 0.5 Hz to 181 Hz |
| Integration Time | 270 ns to approx. Full Frame |
| Standard Temperature Range [with band matched optics] | FLIR X8580-HS InSb (1.5–5.0 µm), f/2.5: -20°C to 300°C (-4°F to 572°F) FLIR X8581-HS InSb (3.0–5.0 µm), f/2.5: 20°C to 350°C (-4°F to 662°F), -10°C for microscopes FLIR X8582-HS InSb (1.5–5.0 µm), f/4.1: -20°C to 350°C (-4°F to 662°F) FLIR X8583-HS InSb (3.0–5.0 µm), f/4.1: -20°C to 350°C (-4°F to 662°F), -10°C for microscopes |
| Optional Temperature Range [with band matched optics] | 45°C to 600°C (ND1) 250°C to 2000°C (ND2) 500°C to 3000°C (ND3) |
| Filtering | 4-position motorized filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/ manual) |
| Imaging & Optical | |
|---|---|
| Available Lenses | FLIR X8580-HS InSb, FLIR X8582-HS InSb : Manual (broadband): 25 mm, 50 mm, 100 mm Motorized (broadband): 25 mm, 50 mm, 100 mm FLIR X8581-HS InSb: Manual (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm Macro Motorized (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm FLIR X8583-HS InSb: Manual (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm, 50 mm Macro Motorized (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm |
| Camera f_number | FLIR X8580-HS InSb, FLIR X8582-HS InSb : f/2.5 FLIR X8581-HS InSb, FLIR X8583-HS InSb: f/4.1 |
| Camera size excl lens [L x W x H] | 249 mm × 157 mm × 147 mm (9.8 in × 6.2 in × 5.8 in) |
| Close_up Lenses_Microscopes | FLIR X8580-HS InSb, FLIR X8582-HS InSb : No microscopes available FLIR X8581-HS InSb: 1x, 3x FLIR X8583-HS InSb: 1x, 3x, 5x, 1 × 20 cm LWD |
| Detector Pitch | 12 µm |
| Detector Type | FLIR Indium Antimonide (InSb) |
| Digital Zoom | 1x, Auto (best fit) |
| Direct to SSD Recording | Direct to SSD Recording Yes, removable 4 TB NVMe SSD included, approx. 2-hours of zero dropped frames record time On-Camera Image Storage RAM (volatile): 64 GB, up to 23,000 frames full frame NVMe U.2 SSD (user-removable/non-volatile): 4 TB U.2 SSD included, up to 1.4 M frames full frame |
| Download of On_Camera RAM, SSD Recordings | Transfer from SSD through 10 GigE, CXP, or CL to Research Studio |
| Dynamic Range | 14-bit |
| Filtering | 4-position motorized filter wheel, standard 1-inch filters, user swappable |
| Focus | Motorized (compatible w/ manual) |
| Frame Rate [Full Window] | Programmable; approx. 0.5 Hz to 181 Hz |
| Image Time Stamp | Internal precision timestamp. IRIG-B AM decoder, TSPI accurate, Free wheel if sync signal is lost |
| Integration Time | 270 ns to approx. Full Frame |
| Lens Interface | FLIR FPO-M (4-tab bayonet, motorized) |
| Operability | ≥99.5% (≥99.9% typical) |
| Overlay | Customizable with the ability to toggle off |
| Palette | Selectable 8-bit |
| Pixel Clock | 355.2 MHz |
| Radiometric Data Streaming | Simultaneous 10 Gigabit Ethernet (GigE Vision), Camera Link, CoaXPress (CXP 2.1) Single link @ 10 Gbps or Dual Link @ 5 Gbps |
| Readout Modes | Asynchronous Integrate While Read; Asynchronous Integrate Then Read |
| Readout Type | Snapshot |
| Resolution | 1280 × 1024 |
| Sensor Cooling | Linear Sterling Cooler |
| Spectral Range | FLIR X8580-HS InSb, FLIR X8582-HS InSb : 1.5 – 5.0 µm FLIR X8581-HS InSb, FLIR X8583-HS InSb: 3.0 – 5.0 µm |
| Standard Video | HDMI, SDI |
| Subwindow Modes | Flexible windowing down to 64 × 4 (steps of 64 columns, 2 rows) |
| Thermal Sensitivity_NETD [typical] | 30 mK typical |
| Video Modes | HD-SDI: 720p@50/59.9 Hz, 1080p@25/29.9 Hz, 1080p@60 Hz SD-SDI: 480i@60 Hz, 576i@50 Hz |
| Measurement & Analysis | |
|---|---|
| Accuracy | ≤100°C ±2°C (±1°C typical), ≥100°C ±2% of reading (±1% typical) |
| Automatic Gain Control | Manual, Linear, Plateau equalization, DDE |
| Optional Temperature Range [with band matched optics] | 45°C to 600°C (ND1) 250°C to 2000°C (ND2) 500°C to 3000°C (ND3) |
| Standard Temperature Range [with band matched optics] | FLIR X8580-HS InSb (1.5–5.0 µm), f/2.5: -20°C to 300°C (-4°F to 572°F) FLIR X8581-HS InSb (3.0–5.0 µm), f/2.5: 20°C to 350°C (-4°F to 662°F), -10°C for microscopes FLIR X8582-HS InSb (1.5–5.0 µm), f/4.1: -20°C to 350°C (-4°F to 662°F) FLIR X8583-HS InSb (3.0–5.0 µm), f/4.1: -20°C to 350°C (-4°F to 662°F), -10°C for microscopes |
| Communication & Data Storage | |
|---|---|
| Synchronization Modes | Sync In, Sync Out, Tri-Level Sync, Video Sync |
| Trigger Mode[s] | Trigger In, Software generated, Time generated |
| General | |
|---|---|
| Weight [without lens] | 6.35 kg (14 lbs) |
| Power | |
|---|---|
| Power | 24 VDC (≤50 W steady state) |
| Environmental & Certifications | |
|---|---|
| Mounting | 2 × ¼ in. -20, 1 × 3/8 in. -16, 4 × #10 -24, Side: 3 × ¼ in. -20 (each side) |
| Operating Temperature Range | -20°C to 50°C (-4°F to 122°F) |
Resources & Support
Datasheet
FLIR X8580-HS INSB Datasheet
Phone Support
International Line:
(+1) 805 392 3775
Local Number:
(+1) 844 283 5471
Service, Repair and Calibration
Americas
Service Center Contact |
Phone |
Submit an RMA |
Email Us |
|---|---|---|---|
| United States |
Toll Free: (+1) 866 477 3687 Local: (+1) 603 324 7600 |
||
| Canada | 800 613 0507 | Submit an RMA | |
| South & Central America | 0800 878 2486 | ||
Europe |
|||
| Belgium | +32 (0)56 363 041 | ||
| Estonia | +3726063976 | ||
| Germany | +49 (0) 69 95 00 900 | ||
| Italy | +390294753491 | ||
| Sweden | +46 (0) 8 753 26 54 | ||
| United Arab Emirates | +971 4 802 4999 | ||
| United Kingdom | +44 (0)1732 220 011 | ||
Asia Pacific |
|||
| Australia | +61 (0) 3 9550 2800 | ||
| China | +86 (0) 21-5169-7628 | ||
| India Delhi | +91 11 47212002 | ||
| India Faridabad | +91 (129) 431-5031/32 | ||
| Japan | 81-3-6721-6648 | ||
| Singapore | +65 8787 0884 | ||
| South Korea | (02)565-2724 | ||
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.