TrafiCam™ 3

Smart City Sensor

Product Variations

FLIR TrafiCam 3 is an affordable, all-round detection sensor for traffic monitoring and dynamic traffic signal control. This rugged, compact uses visual imaging and Wi-Fi technology to adapt traffic signals based on the presence detection of traffic objects vehicles while also generating basic count data at intersections and in urban environments. Key to helping traffic engineers improve vehicle flows, monitor congestion, and enhance safety, TrafiCam 3 ensures cities can collect accurate road data as well as measure travel and delay times for different transport modes.

Monitors MAC addresses of Wi-Fi-enabled devices such as smartphones to determine rates of travel along road segments.
Generates basic count data at intersections and in urban environments, in any environmental conditions.
Mounts quickly and integrates with existing platforms through BPL technology or PoE connection.

Specifications

System Overview
Detection Functionalities Vehicle presence
Detection Zones 8 vehicle presence zones
Communications
Compression H.264, MPEG-4, MJPEG
Configuration Web page via secure Wi-Fi or Ethernet
Ethernet 10/100 MBps PoE A and PoE B
Output 1 N/O and 1 N/C dry contacts direct
16 N/C dry contacts via TI BPL3, TI SLT or 4 N/C via BPL3
Edge B&SIU onboard + maximum 5x N/C via 4I/O USB
expansion boards (max. total 24 outputs)
SDLC: BIU–64 or SUI–128
WiFi IEEE 802.11 type b,g,n EIRP <100 mW
Electrical
Detection Distance TrafiCam3 Wide: 0–25 m (0–85 ft)
TrafiCam3 Narrow: 15–75 m (50–250 ft)
FCC FCC part 15 class A
Input Power 12 – 42 VAC
12 – 48 VDC
Power Consumption Average 6.2 W, peak 7 W, peak with powerdip 14 W
Powerline Communication Via TI BPL3 or TI BPL3 EDGE interface
Environmental
EU Directives EMC 2014/30/EU, RoHS 2011/65/EU
IP Rating IP67
Operating Temperature -40°C to 74°C (-40°F to 165°F)
Shock and Vibration NEMA TS2 specs
Imaging & Optical
Frame Rate 15 fps
Resolution 640 × 480 pixel, color CMOS
Streaming Video RTSP
Mechanical
Bracket PA GF30 mounting clamps and aluminum tube
Dimensions [incl mounting bracket] 70 × 200 × 440 mm (2.75 × 7.87 × 17.32 in)
Installation Height TrafiCam3 Wide: 3.5–6 m (11.4–19.6 ft)
TrafiCam3 Narrow: 5.5–8 m (18.0–26.0 ft)
Material Aluminum housing with PC GF10 sunshield; All weatherproof UV-resistant
Weight 850 g / 1.87 lb (camera with bracket)

Resources & Support

Datasheet

FLIR TrafiCam3 Datasheet

Export Restrictions

The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.