FH-Series R
Multispectral Fixed Camera for Early Fire Detection
The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
Specifications
| Compliance & Certifications | |
|---|---|
| Approvals | FCC Part 15 (Subpart B, class A), CE Marked |
| Certifications | IEC 62368 |
| Compliance | RoHS, WEEE |
| Environmental | |
|---|---|
| Humidity | 0-95% relative humidity |
| IP Rating [dust and water ingress] | IP66 & IP67 |
| Operating Temperature Range | -40°C to 70°C/-40°F to 158°F |
| Shock | IEC 60068-2-27 |
| Storage Temperature Range | -50°C to 85°C/-58°F to 185°F |
| Vibration | IEC 60068-2-64 |
| General | |
|---|---|
| Dimensions [L x W x H] | 314 x 233 x 124 mm/12.4" x 9.2" x 4.9" |
| Power Consumption | Nominal: 15 W Heaters enabled, 12 VDC: 48 W Heaters enabled, all other inputs: 70 W |
| Surge Immunity on AC Power Lines | EN 50130-4 |
| Surge Immunity on Signal Lines | EN 50130-4 |
| Measurement & Analysis | |
|---|---|
| Analytics Features | Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Tampering, Loitering, CNN classifier |
| Analytics Management | Web-based confguration and management, masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control |
| Measurement Accuracy | Target below 100 °C (212 °F): ± 5 °C (±9 °F) accuracy Target below 150 °C (302 °F): ± 5% accuracy Target above 150 °C (302 °F): ± 15% accuracy *Measured at 25°C ambient temperature. Error may be greater at extreme temperatures |
| Object Temperature Range | High Gain Mode: 0°C to 160°C (32°F to 320°F) Low Gain Mode: 0°C to 380°C (32°F to 716°F) |
| System Integration | |
|---|---|
| Control Input_Output | Input: two dry alarm contacts Output: two relay contacts 1A max at 24 Vac/30 Vdc Configurable between normally open and normally closed |
| Ethernet | 100/1000 Mbps |
| External Analytics Compatible | Yes |
| Network APIs | NEXUS® SDK NEXUS® CGI ONVIF Profile S, G, T |
| Streaming Resolutions | FLIR FH-313 R, FLIR FH-324 R, FLIR FH-369 R: Primary Stream:
Thermal: QVGA (320 x 256)
Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480
Secondary Stream:
Thermal: QVGA (320 x 256)
Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480 FLIR FH-617 R, FLIR FH-625 R, FLIR FH-644 R, FLIR FH-669 R: Primary Stream: Thermal: VGA (640x512), QVGA (320 x 256) Visible: 4k (3840 x 2160), 1080P (1920x1080), 720P (1280x720) & VGA 640x480 Secondary Stream: Thermal: VGA (640x512), QVGA (320 x 256) Visible: 1080P (1920x1080), 720P (1280x720) & VGA 640x480 |
| Supported Protocols | IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X, ONVIF |
| Video Over Ethernet | Two independent channels of H.264/H.265 or M-JPEG (except 4k) for visible and thermal |
| Thermal Camera | |
|---|---|
| Array Format [Thermal] | FLIR FH-313 R, FLIR FH-324 R, FLIR FH-369 R: 320 × 256 FLIR FH-617 R, FLIR FH-625 R, FLIR FH-644 R, FLIR FH-669 R: 640 × 512 |
| Detector Pitch [Thermal] | 17 µm |
| f number [Thermal] | FLIR FH-313 R, FLIR FH-617 R, FLIR FH-625 R: f/1.1 FLIR FH-324 R, FLIR FH-644 R: f/1.0 FLIR FH-369 R, FLIR FH-669 R: f/1.4 |
| Field of View [FOV] [Thermal] | FLIR FH-313 R: 13° × 10° FLIR FH-324 R: 24° × 18° FLIR FH-369 R: 69° × 56° FLIR FH-617 R: 17° × 14° FLIR FH-625 R: 25°×18° FLIR FH-644 R: 44°×36° FLIR FH-669 R: 69° × 56° |
| Image Uniformity Optimization | Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers |
| Spectral Range [Thermal] | 7.5 µm to 13.5 µm |
| Thermal AGC Modes | Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting |
| Thermal AGC Region of Interest [ROI] | Default, Presets and User definable to insure optimal image quality on subjects of interest |
| Thermal Sensitivity_NETD [Thermal] | <35mK @ 25°C F# 1.0 |
| Video Frame Rate [Thermal] | NTSC: 30 Hz or PAL: 25 Hz / 8.3 Hz |
| Visible Camera | |
|---|---|
| Array Format [Visible] | 4K 2160p (3840 x 2160) |
| f number [Visible] | FLIR FH-313 R, FLIR FH-324 R, FLIR FH-617 R, FLIR FH-625 R, FLIR FH-644 R: 1.8 FLIR FH-369 R, FLIR FH-669 R: 1.6 |
| Field of View [FOV] [Visible] | FLIR FH-313 R: 18° × 10° FLIR FH-324 R: 34° × 19° FLIR FH-369 R: 98° x 55° FLIR FH-617 R: 24° × 14° FLIR FH-625 R: 36°×20° FLIR FH-644 R: 63°×35° FLIR FH-669 R: 98° x 55° |
| Video Frame Rate [Visible] | 30 Hz or less |
| Video & Recording | |
|---|---|
| Composite Video NTSC or PAL | Hybrid system with IP & analog video |
| Local Storage | Support for SD Card (not supplied) |
Accessories
Resources & Support
Note: You must be logged in to download software or firmware. Login or create an account.
Firmware Download
FLIR FH-Series R Firmware v3.0.0.12
Software Download
FLIR DNA Software - Version 2.3.0.35
Datasheet
FLIR FH-Series R Datasheet a4
AE Spec
FLIR FH-Series R A&E Specifications
Brochure
FLIR Automation Brochure
Quick Start Guide
FLIR FH-Series Quick Install Guide
User Manual
FLIR FH-Series Installation and User Guide
Firmware Release Note
FLIR FH-Series Release Notes v3.0.0.12
Configuration Guide
FLIR PT-Series HD Pairing Configuration Guide
Software Release Note
FLIR Discovery Network Assistant (DNA) Software Release Note v2.3.0.35
Selection Guide
FLIR Security Product Matrix Selection Guide
Compatibility
FLIR Security Cameras & Encoders - Supported 3rd Party Platforms
- 1
- 2
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.